Technology Presentations
Presented by Sean Murray, Solution Sales Manager for Assembléon, Americas Region
This presentation was recorded live in Las Vegas, Nevada at IPC APEX EXPO™ 2009, March 31-April 2, 2009
Presented by Eric Slezak, Director of Business Development and Printed Circuit Board Assembly Products, Indium Corporation
This presentation was recorded live in Las Vegas, Nevada at IPC APEX EXPO™ 2009, March 31-April 2, 2009
Presented by Tom Newton Director of PCB Programs, Standards and Technology for IPC.
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Mike Model, Technical Marketing Manager for Board Mounted Power (BMP) Modules for Lineage Power
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Dr. Scott Strand, Senior Technical Staff Member in Integrated Technology Delivery Quality for IBM
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Don Gerstle, Vice President, Design Quality, Murata Power Solutions
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by T. Paul Parker, Consulting Member of Technical Staff Quality Organization Lineage Power from a technical paper authored by Dr. Bill Tian, Hewlett-Packard Co.
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Jerry Strunk, Technical Manager, Qualification and Compliance Group at Lineage Power
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Lynn Simmons, Dell, Inc.
This presentation was recorded live in Irving, Texas during The IPC-9592 Conference — the NEW Industry Standard for Power Conversion event, November 6, 2008
Presented by Jack Fisher, Chairman of the IPC National Technology Roadmap For Electronic Interconnections and a consultant on interconnect technology.
This presentation was recorded live in Irving, Texas during the IPC HDI Technology Conference: Building the Supply Chain Infrastructure, October 6-8, 2008
Presented by Bev Christian, Director of Materials, Interconnect Research for Research In Motion.
This presentation was recorded live in Schaumburg, Illinois during the IPC Midwest Conference and Exhibition, September 20-25, 2008
Presented by James Fuller
at The Endicott Technology Interchange sponsored by IPC.
This presentation was recorded live in Endicott, NY on May 14, 2008
Presented by Karl Dietz, PhD
at The Endicott Technology Interchange sponsored by IPC.
This presentation was recorded live in Endicott, NY on May 14, 2008
Presented by Happy Holden
at The Endicott Technology Interchange sponsored by IPC.
This presentation was recorded live in Endicott, NY on May 14, 2008
Design and Assembly Process Standard for Ball Grid Array update.
Standard for Determining Current-Carrying Capacity in Printed Board Design
Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards
Dr. Scott Strand, senior technical staff member, integrated technology, IBM, provides an overview of IPC-9592.
Revision B Requirements for Soldering Fluxes
Paul Krystek, lead co-chairman of the ECA/IPC/JEDEC J-STD-075 committee, provides an overview of J-STD-075, Classification of Non-IC Electronic Components for Assembly Processes.
Linda Woody of Lockheed Martin gives a keynote presentation at the High-Performance Electronics Assembly Cleaning Symposium in Rosemont, Illinois on October 29, 2008
An introduction to printed circuit board troubleshooting.
Management Presentations
Presented by Mike Carano, Vice President of Marketing and Development, OMG Electronic Chemicals
This presentation was recorded live in Las Vegas, Nevada during IPC APEX EXPO™, March 31, 2009
Presented by John Hartner, Executive Vice President of Dover Electronic Technologies
This presentation was recorded live in Las Vegas, Nevada during IPC APEX EXPO™, March 31, 2009
Presented by Greg Papandrew, President of Bare Board Group Inc.
This presentation was recorded at IPC’s PCB Executive Management Council Meeting in conjunction with the IPC Executive Marketing & Technology Forum Conference and Management Meetings in Kissimmee, Florida, October 29-30, 2008
Presented by Mark C. Hehl, Partner in Hehl & Associates
This presentation was recorded during the IPC SMEMA Management Council Meetings in conjuction with the IPC Executive Marketing & Technology Forum Council and Management Meetings in Kissimmee, Florida, October 29-30, 2008
Presented by TJ Sponsel II, co-founder of and partner in McGuire Sponsel and director of McGuire Sponsel’s Research & Experimentation Tax Credit Practice.
This presentation was recorded live in Schaumburg, Illinois during the IPC Midwest Conference and Exhibition, September 20-25, 2008
Presented by Lawrence M. Friedman, a partner with Barnes, Richardson & Colburn, specializing in the representation of importers and exporters facing challenges in complying with U.S. international trade laws.
This presentation was recorded live in Schaumburg, Illinois during the IPC Midwest Conference and Exhibition, September 20-25, 2008
Karen Carpenter outlines best practices in marketing.
Greg Papandrew discusses best practices in sales.
IPC technical conference director Greg Munie shares highlights from the IPC Midwest Conference and Exhibition.
Attorney Jason Mirabito weighs in on how to effectively develop a patent strategy.
Innovation expert Robert Tucker describes the best path to optimal innovation.
IPC President Denny McGuirk shares IPC’s goals for its members and the association in 2009.
Government Relations Presentations
Presented by Ron Chamrin, Manager of Government Relations for IPC
This presentation was recorded live in Washington, DC during the IPC Capitol Hill Day event, May 6-8, 2009
Presented by Martha Cogdell, Director, Federal and State Government Relations for Rockwell Collins
This presentation was recorded live in Washington, DC during the IPC Capitol Hill Day event, May 6-8, 2009
Presented by Monica McGuire, Senior Policy Director of Taxation for the National Association of Manufacturers (NAM)
This presentation was recorded live in Washington, DC during the IPC Capitol Hill Day event, May 6-8, 2009
Presented by Karen Magee Myers, Vice President of Global Government Relations at CA, Inc.
This presentation was recorded live in Washington, DC during the IPC Capitol Hill Day event, May 6-8, 2009
Joe O'Neil explains best practices for these often misunderstood regulations.
|
Environmental Presentations
Presented by Stephanie Castorina, Manager of Environmental Programs for IPC
This presentation was recorded live in Minneapolis, MN at the Surface Mount Technology Association (SMTA) Upper Midwest (UMW) Chapter conference, March 10, 2009
Presented by Susan D. Landry, Advisor, Fire Safety & Advocacy, Albemarle Corporation
This presentation was recorded live in San Jose, California at the IPC Symposium on Electronics and the Environment, "It’s Not Easy Being Green: Compliance with Legislation and Customer Requirements", February 4–5, 2009
Presented by Maureen Gorsen, Director, State of California Department of Toxic Substances Control
This presentation was recorded live in San Jose, California at the IPC Symposium on Electronics and the Environment, "It’s Not Easy Being Green: Compliance with Legislation and Customer Requirements", February 4–5, 2009
Presented by Paul Goodman, Senior Materials Consultant, Reliability and Failure Analysis Group, ERA Technology Ltd. and consultant to the EU on WEEE and RoHS directives and REACH regulations.
This presentation was recorded live in Kissimmee, Florida at IPC’s 2008 Executive Marketing & Technology Forum Conference and Management Meetings, October 29–30, 2008
Presented by Leo Lambert, Vice President and Technical Director, EPTAC Corporation, Manchester, NH
This presentation was recorded live in Schaumburg, Illinois during the IPC Midwest Conference and Exhibition, September 20-25, 2008
Presented by David Hillman, Metallurgical Engineer in the Advanced Operations Engineering Department of Rockwell Collins Inc. at IPC’s 2008 Meeting Industry Response to Oko-Institut Recommendations.
This presentation was recorded live in Brussels, Belgium on June 18, 2008
Presented by Fern Abrams Director, Government Relations and Environmental Policy, IPC at IPC’s 2008 Meeting Industry Response to Öko-Institut Recommendations.
This presentation was recorded live in Brussels, Belgium on June 18, 2008
Presented by Paul Goodman, Senior Materials Consultant, Reliability and Failure Analysis Group, ERA Technology Ltd. and consultant to the EU on WEEE and RoHS directives and REACH regulations at IPC’s 2008 Meeting Industry Response to Öko-Institut Recommendations.
This presentation was recorded live in Brussels, Belgium on June 18, 2008
Bret Bruhn, environmental operations manager for Merix Corporation in North America, and member of the IPC EHS steering committee, shares the benefits the new definition of solid waste rule brings the industry and provides an example of how the new rule will be used.
Tim Jensen from Indium Corporation talks about the challenges the industry faces in becoming halogen-free.
Leo Lambert discusses the latest in lead-free assembly.
Fern Abrams, IPC director of government relations and environmental policy, tells us the implications the RoHS revision may have on the industry.
Market Research Presentations
Presented by Sharon Starr, Director of Market Research for IPC.
This presentation was recorded live in Schaumburg, Illinois during the IPC Midwest Conference and Exhibition, September 20-25, 2008
Presented by Karen Carpenter
at IPC's 2007 Executive Market & Technology Forum Conferences in Shanghai and Las Vegas
This presentation was recorded live in Shanghai on September 19, 2007
Presented by Shauzab H. Ladha
at IPC's 2007 Executive Market & Technology Forum Conferences in Shanghai and Las Vegas
This presentation was recorded live in Shanghai on September 19, 2007
Presented by Martin Rausch
at IPC's 2007 Executive Market & Technology Forum Conferences in Shanghai and Las Vegas
This presentation was recorded live in Shanghai on September 19, 2007
Sharon Starr, director of market research for IPC, illustrates some of the industry data available to IPC members and explains how the information can be used to help companies thrive.
|
Slideshow
Podcast
"